扫描仪检测_检测机构_测试报告_「北检研究院」第三方测试中心

扫描仪检测

检测咨询量：11位发布时间：2023-04-04 19:13:27 更新时间：2025-05-03 21:46:44

第三方扫描仪检测机构北检（北京）检测技术研究院拥有齐全的检测仪器和多领域检测团队，数据科学严谨，检测设备齐全。能提供全方位检测服务，7-15个工作日便可出具扫描仪检测报告。

在线咨询联系总部

检测项目（部分）

能效

关闭状态下功耗

主要技术性能

噪声

进入睡眠状态预设延迟时间

待机状态下功率

进入睡眠状态预设时间

部分参数

睡眠状态下功率

可靠性试验

睡眠状态下能耗

检测样品（部分）

扫描仪

平板式扫描仪

馈纸式扫描仪

检测标准（部分）

国家标准 GB/T 18788-2008 平板式扫描仪通用规范

【适用范围】本标准规定了平板式扫描仪的要求、试验方法、检验规则以及标志、包装、运输和储存等。本标准适用于平板式扫描仪(以下简称产品)的设计、开发、生产、测试和验收。其他类型的扫描仪可参照使用。

【中国标准分类】 L63 计算机【国际标准分类】 35.180-IT终端和其他外围设备

国家标准 GB/T 18788-2002 平台式扫描仪通用规范

【适用范围】

【中国标准分类】 L63 计算机【国际标准分类】 35.180-IT终端和其他外围设备

国家标准 GB/T 19475.1-2004 缩微摄影技术开窗卡扫描仪制作影像质量的测量方法第1部分:测试影像的特征

【适用范围】 GB/T 19475的本部分规定了用于评价或检测开窗卡扫描仪产生的电子影像质量的测试影像特征。

【中国标准分类】 A14 经济、文化【国际标准分类】 37.080-文献成象技术

国家标准 GB/T 19475.2-2004 缩微摄影技术开窗卡扫描仪制作影像质量的测量方法第2部分:质量要求和控制

【适用范围】 GB/T 19475的本部分规定了用GB/T 19475.1-2004所规定的测试影像进行开窗卡扫描仪制作影像质量的检测方法。

【中国标准分类】 A14 经济、文化【国际标准分类】 37.080-文献成象技术

国家标准 GB/T 25885-2010 羊毛纤维平均直径及其分布试验方法激光扫描仪法

【适用范围】本标准规定了应用纤维直径激光扫描仪测定羊毛纤维平均直径及其分布的方法。本标准适用于测量原毛、洗净毛和毛条纤维平均直径及其分布。

【中国标准分类】 W04 纺织综合【国际标准分类】 59.060.10-天然纤维

国家标准 GB/T 28166-2011 馈纸式扫描仪通用规范

【适用范围】本标准规定了馈纸式扫描仪的要求、试验方法、质量评定程序及标志、包装、运输、贮存等。本标准适用于馈纸式扫描仪的设计和制造。本标准是制定产品标准的依据。

【中国标准分类】 L63 计算机【国际标准分类】 35.180-IT终端和其他外围设备

国家标准 GB/T 33805-2017 激光共聚焦生物芯片扫描仪技术要求

【适用范围】本标准规定了激光共聚焦生物芯片扫描仪的术语和定义、要求、试验方法、标志、标签和使用说明、包装、运输和贮存。
本标准适用于体外诊断用医疗器械，以平面基质为载体、基于激光共聚焦原理的扫描仪。

【中国标准分类】 C30 医药器械【国际标准分类】 11.040.55-诊断设备

国家标准 GB/T 33806-2017 面阵荧光成像微阵列芯片扫描仪技术要求

【适用范围】本标准规定了面阵荧光成像微阵列芯片扫描仪（以下简称扫描仪）的术语和定义、基本参数、要求、试验方法、检验规则、标志、标签和使用说明书、包装、运输和贮存。
本标准适用于体外诊断用医疗器械，以平面基质为载体，基于CCD(Charge Coupled Device，电荷耦合器件）和CMOS(Complementary Metal-Oxide Semiconductor，互补性氧化金属半导体）探测器，进行
一次和多次拍照的面阵荧光成像微阵列芯片扫描仪。

【中国标准分类】 C30 医药器械【国际标准分类】 11.040.55-诊断设备

国家标准 GB/T 39111-2020 牙颌模型三维扫描仪技术要求

【适用范围】本标准规定了牙颌模型三维扫描仪的要求和试验方法。
本标准适用于牙颌模型三维扫描数据获取、编辑和输出的设备（以下简称“扫描仪”）。

【中国标准分类】 C33 医药器械【国际标准分类】 11.060.10-牙科材料

国家标准 GB/T 39867-2021 正电子发射断层扫描仪用锗酸铋闪烁晶体

【适用范围】本标准规定了正电子发射断层扫描仪用锗酸铋闪烁晶体材料的产品编号、技术要求、检测方法、检验规则、标识、包装、运输和储存。
本标准适用于正电子发射断层扫描仪用锗酸铋(Bi₄Ge₃O₁₂）闪烁晶体材料。

【中国标准分类】 Q65 其他非金属矿制品【国际标准分类】 07.030-物理学、化学

国家标准 GB/T 40826-2021 分梳山羊绒手排长度试验方法图板电子扫描仪法

【适用范围】本文件描述了用图板电子扫描仪检测分梳山羊绒手排长度的测定方法。
本文件适用于分梳山羊绒，经过分梳后的毛绒散纤维、洗净绵羊毛的手排长度参考使用。

【中国标准分类】 W20 毛纺织【国际标准分类】 59.060-纺织纤维

国家级标准 JJF 1406-2013 地面激光扫描仪校准规范

【适用范围】本规范规定了静态地面激光扫描仪（以下简称扫描仪）的校准方法，适用于脉冲式或相位式扫描仪的校准，其他原理的扫描仪也可参照此规范进行校准。

【中国标准分类】 A52 计量【国际标准分类】 17.040-长度和角度测量

国家级标准 JJF 1712-2018 薄层色谱扫描仪校准规范

【适用范围】本规范适用于薄层色谱扫描仪（以下简称仪器）的校准。

【中国标准分类】 A61 计量【国际标准分类】 17.020-计量学和测量综合

国家级标准 JJF 1719-2018 铁路罐车和罐式集装箱容积三维激光扫描仪校准规范

【适用范围】本规范适用于铁路罐车和罐式集装箱容积三维激光扫描仪（以下简称“扫描仪”的校准）。

【中国标准分类】 A52 计量【国际标准分类】 17.060-体积、质量、密度和粘度的测量

行业标准 HJ 2517-2012 环境标志产品技术要求扫描仪

【适用范围】本标准规定了扫描仪类环境标志产品的术语和定义、基本要求、技术内容和检验方法。本标准适用于各类扫描仪。本标准不适用于附带扫描功能的其他设备。

【中国标准分类】 C43 文教、体育、娱乐用品【国际标准分类】 11.040.99-其他医疗设备

行业标准 SN/T 3324.6-2014 出口信息技术设备检验技术要求第6部分:扫描仪的能效

【适用范围】SN／T 3324的本部分规定了出口扫描仪的能效技术要求、试验方法、检验及合格判定。本部分适用于由电网电源或数据/网络接口供电的、额定电压不超过250V的出口家用、办公及类似用途扫描仪的能效检验。

【中国标准分类】 L63 计算机【国际标准分类】 35.180-IT终端和其他外围设备

行业标准 YY/T 0748.1-2009 超声脉冲回波扫描仪第1部分:校准空间测量系统和系统点扩展函数响应测量的技术方法

【适用范围】YY/T 0748的本部分规定了0.5MHz-15MHz超声频率范围内，校准空间测量工具和超声成像设备点扩展函数的方法，本部分涉及下列基于超声回波原理类型的超声扫描仪：机械扇形扫描仪；电子相控阵扇形扫描仪；电子线阵扫描仪；电子凸阵扇形扫描仪；基于上述四种扫描机理的水囊式扫描仪；三维重建系统。

【中国标准分类】 C41 医药器械【国际标准分类】 11.100-实验室医学

行业标准 YY/T 1476-2016 超声膀胱扫描仪通用技术条件

【适用范围】本标准规定了超声膀胱扫描仪的产品组成与基本参数、要求、试验方法、检验规则、标志和使用说明书。本标准适用于采用三维超声容积测量技术，专门用于测量膀胱内尿量的设备(以下简称设备)。

【中国标准分类】 A14 医药器械【国际标准分类】 37.080-文献成象技术

国际标准 ISO 11698-2-2000 缩微摄影技术-由空卡扫描仪产生图片质量的测定方法-第二部分:质量标准和控制

【适用范围】This part of ISO 11698 specifies methods for using the test images specified in ISO 11698-1 to check the quality of images produced by aperture card scanners.

【中国标准分类】 A14 经济、文化【国际标准分类】 37.080-文献成象技术

国际标准 ISO 12641-1-2016 图形技术--印前数码数据交换--颜色输入扫描仪校准的目标--第1部分:彩色扫描仪校准目标输入

【适用范围】This part of ISO 12641 defines the layout and colorimetric values of targets for use in the calibration of a photographic product/input scanner combination (as used in the preparatory process for printing and publishing). One target is defined for positive colour transparency film and another is defined for colour photographic paper.

【中国标准分类】 N46 经济、文化【国际标准分类】 37.040.20-相纸、胶卷和暗盒

国际标准 ISO 16067-2-2004 摄影.摄影图片的电子扫描仪.空间分辨率测量.第2部分:胶片扫描仪

【适用范围】This International Standard specifies methods for measuring and reporting the spatial resolution of electronic scanners for continuous tone photographic negatives and reversal (e.g. slide) films. The International Standard applies to both monochrome and colour film scanners.

【中国标准分类】 A15;N47 经济、文化【国际标准分类】 37.040.99-有关摄影技术的其他标准

国际标准 ISO 17123-9-2018 光学和光学仪器--大地测量和测量仪器的现场试验程序--第9部分:地面激光扫描仪

【适用范围】This document specifies field procedures for determining and evaluating the precision (repeatability) of terrestrial laser scanners and their ancillary equipment when used in building civil engineering and surveying measurements. Primarily these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task at hand and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature.
This document can be thought of as one of the first steps in the process of evaluating the uncertainty of measurements (more specifically of measurands).

【中国标准分类】 N30 光学仪器【国际标准分类】 17.180.30-光学测量仪器

国际标准 ISO 21550-2004 摄影技术--照相图像的电子扫描仪--电子行程的测量

【适用范围】This International Standard specifies methods for measuring and reporting the dynamic range of electronic scanners for continuous tone photographic media. It applies to scanners for reflective and to scanners for transmissive media.

【中国标准分类】 A15 经济、文化【国际标准分类】 37.040.10-摄影设备、投影仪

国际标准 IEC 61391-1-2017 超声学--脉冲回声扫描仪--第1部分:校正空间测量系统和测量点扩展函数响应技术

【适用范围】This International Standard describes methods of calibrating the spatial measurement facilities and point-spread function of ultrasonic imaging equipment in the ultrasonic frequency range 0 5 MHz to 15 MHz. This standard is relevant for ultrasonic scanners based on the pulse-echo principle of the types listed below:
− mechanical sector scanners;
− electronic phased-array sector scanners;
− electronic linear-array scanners;
− electronic curved-array sector scanners;
− water-bath scanners based on any of the above four scanning mechanisms;
− 3D-volume reconstruction systems.

【中国标准分类】 C41 医药器械【国际标准分类】 17.140.50-电声学

国际标准 IEC 61391-1-2006 超声波学--脉冲反射扫描仪--第1部分：系统点播功能响应的空间测量系统校准和测量技术

【适用范围】This International Standard describes methods of calibrating the spatial measurement facilitiesand point-spread function of ultrasonic imaging equipment in the ultrasonic frequency range0 5 MHz to 15 MHz. This standard is relevant for ultrasonic scanners based on the pulse-echoprinciple of the types listed below:? mechanical sector scanners;? electronic phased-array sector scanners;? electronic linear-array scanners;? electronic curved-array sector scanners;? water-bath scanners based on any of the above four scanning mechanisms;? 3D-volume reconstruction systems.

【中国标准分类】 A59 医药器械【国际标准分类】 17.140.50-电声学

国际标准 IEC 61966-8-2001 多媒体系统和设备--色彩测量和控制--第8部分:多媒体色彩扫描仪

【适用范围】This part 8 of IEC 61966 is applicable to the characterization and assessment of multimedia colour scanners used in computer systems multimedia and similar applications.The methods of measurement standardized in this part are designed to make possible the characterization and objective performance assessment of multimedia colour scanners which can capture colour images and output colour information such as red green and blue data from reflective originals. The measured results are intended to be used for the purpose of colour management in multimedia systems. Measurement conditions possible methods of measurement and characterization are defined to make colour management possible.Colour control within the equipment is out of the scope of this part. For calibration of prepress input scanners ISO 12641 will be applied.

【中国标准分类】 M71 广播、电视设备【国际标准分类】 33.160.60-多媒体系统和电话会议设备

国际标准 IEC TS 62558-2011 超声学实时脉冲回声扫描仪圆柱形人体模型、仿人体材料中的人造囊以及空隙检测率(VDR)3D分布的定期测试与评定方法

【适用范围】

【中国标准分类】 A59 医药器械【国际标准分类】 17.140.50-电声学

国际标准 IEC TS 62791-2015 超声波--脉冲反射波扫描仪--低回声球幻影和应用于广泛的传感器类型的灰度医用超声扫描仪性能测试方法

【适用范围】This Technical Specification defines terms and specifies methods for quantifying the imaging
performance of real-time ultrasound B-mode scanners. The types of transducers used (see
sections 7.6 and 10.7 of [1]) with these scanners include
a) phased array
b) linear arrays
c) convex arrays
d) mechanical sector scanners
e) 3-D probes operating in 2-D imaging mode (see Annex K)
f) 3-D probes operating in 3-D imaging mode for a limited number of sets of reconstructed
2-D images (see Annex K).
The test methodology is applicable for transducers operating in the 2 MHz to 15 MHz
frequency range.

【中国标准分类】 L63 医药器械【国际标准分类】 35.180-IT终端和其他外围设备

国际标准 ISO/IEC 15423-2009 信息技术--通用即插即用(UPnP)设备结构--第9-2部分：成像设备控制协议--扫描仪设备

【适用范围】This device template is compliant with the UPnP Device Architecture Version 1.0.Scanner:1 represents a Scanner device with an optional feeder and minimal front panel. The associated servicesmay be used to configure and initiate a scan operation control the use of a feeder and identify the intendedrecipients of front-panel interactions. The following services are defined:? Scan – Used to acquire image files that represent the document(s)? Feeder – Used to configure and independently control an optional document feeder? ExternalActivity – Used to configure and interact with a simple front panel on the deviceThis device template does not address:? Fax or Copy functions

【中国标准分类】 L63 计算机【国际标准分类】 35.200-接口和互连设备

国外标准 ASTM D7954/D7954M-2014 用无损电阻抗扫描仪测定屋面防水系统含水量的规程

【适用范围】1.1 This practice applies to techniques that use non-destructive electrical impedance (EI) scanners to locate moisture and evaluate the comparitive moisture content within insulated low-slope roofing and waterproofing systems. 1.2 This practice is applicable to roofing and waterproofing systems wherein insulation is placed above the deck and positioned underneath and in contact with electrically nonconductive single-ply or built-up roofing and waterproofing membranes and systems such as coal tar asphalt modified bitumen thermoplastics spray polyurethane foam and similar electrically non-conductive membrane materials. This practice is also applicable to roofing and waterproofing systems without insulation placed above moisture absorbing decks such as wood concrete or gypsum that are in contact with single-ply or built-up roofing and waterproofing membranes as described above. 1.3 This practice is applicable to roofing and waterproofing systems incorporating electrically nonconductive rigid board insulation made from materials such as organic fibers perlite cork fiberglass wood-fiber polyisocyanurate polystyrene phenolic foam composite boards gypsum substrate boards and other electrically nonconductive roofing and waterproofing systems such as spray-applied polyurethane foam. 1.4 This practice is not appropriate for all combinations of materials used in roofing and waterproofing systems. 1.4.1 Metal and other electrically conductive surface coverings and near-surface embedded metallic components are not suitable for surveying with impedance scanners because of the electrical conductivity of these materials. 1.4.2 Black ethylene propylene diene terpolymer (EPDM) produces false positive readings when tested because of the material’s high dielectric constant. 1.4.3 Aluminum foil on top-faced insulation roofing or waterproofing membranes gives a false positive reading and is not suitable for

【中国标准分类】 Q17 建材产品【国际标准分类】 91.060.20-屋顶

国外标准 ASTM E2382-2004 扫描隧道显微镜和原子力显微镜中扫描仪及相关端头人工制品指南

【适用范围】

1.1 All microscopes are subject to artifacts. The purpose of this document is to provide a description of commonly observed artifacts in scanning tunneling microscopy (STM) and atomic force microscopy (AFM) relating to probe motion and geometric considerations of the tip and surface interaction provide literature references of examples and where possible to offer an interpretation as to the source of the artifact. Because the scanned probe microscopy field is a burgeoning one this document is not meant to be comprehensive but rather to serve as a guide to practicing microscopists as to possible pitfalls one may expect. The ability to recognize artifacts should assist in reliable evaluation of instrument operation and in reporting of data.

1.2 A limited set of terms will be defined here. A full description of terminology relating to the description operation and calibration of STM and AFM instruments is beyond the scope of this document.

【中国标准分类】 A20 基础标准【国际标准分类】 17.040.20-表面特征

国外标准 ASTM E2382-2004(2012) 用无损电阻抗扫描仪测定屋面防水系统含水量的规程

【适用范围】1.1 This practice applies to techniques that use non-destructive electrical impedance (EI) scanners to locate moisture and evaluate the comparitive moisture content within insulated low-slope roofing and waterproofing systems. 1.2 This practice is applicable to roofing and waterproofing systems wherein insulation is placed above the deck and positioned underneath and in contact with electrically nonconductive single-ply or built-up roofing and waterproofing membranes and systems such as coal tar asphalt modified bitumen thermoplastics spray polyurethane foam and similar electrically non-conductive membrane materials. This practice is also applicable to roofing and waterproofing systems without insulation placed above moisture absorbing decks such as wood concrete or gypsum that are in contact with single-ply or built-up roofing and waterproofing membranes as described above. 1.3 This practice is applicable to roofing and waterproofing systems incorporating electrically nonconductive rigid board insulation made from materials such as organic fibers perlite cork fiberglass wood-fiber polyisocyanurate polystyrene phenolic foam composite boards gypsum substrate boards and other electrically nonconductive roofing and waterproofing systems such as spray-applied polyurethane foam. 1.4 This practice is not appropriate for all combinations of materials used in roofing and waterproofing systems. 1.4.1 Metal and other electrically conductive surface coverings and near-surface embedded metallic components are not suitable for surveying with impedance scanners because of the electrical conductivity of these materials. 1.4.2 This practice is not appropriate for use with black EPDM any membranes containing black EPDM or black EPDM coatings because black EPDM gives false positive readings. 1.4.3 Aluminum foil on top-faced insulation roofing or waterproofing membranes gives a false positive reading and is n

【中国标准分类】 Q17 建材产品【国际标准分类】 91.060.20-屋顶

国外标准 BS ISO 11698-1-2001 缩微照相.开窗孔卡扫描仪生成影像质量的测量方法.测试影像的特性

【适用范围】This part of ISO 11698 specifies the characteristics of the test images used for evaluating or checking the quality of electronic images generated by aperture card scanners.

【中国标准分类】 A15 经济、文化【国际标准分类】 37.080-文献成象技术