当前位置: 首页 > 检测项目 > 化工检测>双酚A检测
双酚A检测,双酚A检测报告
双酚A检测
检测咨询量:23位   发布时间:2023-02-27 12:19:20   更新时间:2025-06-16 03:59:11   
第三方双酚A检测机构北检(北京)检测技术研究院拥有齐全的检测仪器和多领域检测团队,数据科学严谨,检测设备齐全。能提供全方位检测服务,7-15个工作日便可出具双酚A检测报告。

注意:因业务调整,暂不接受个人委托测试,望见谅。

检测项目(部分)

部分参数

检测样品(部分)

双酚A型环氧树脂

检测标准(部分)

国家标准 GB/T 13657-2011 双酚--A型环氧树脂
【适用范围】 本标准规定了双酚-A型环氧树脂的技术要求、试验方法、检验规则以及标志、包装、运输和贮存的要求。 本标准适用于双酚-A型环氧树脂。 本标准不适用于含固化剂的双酚-A型环氧树脂。
【中国标准分类】  G32  合成材料 【国际标准分类】  83.080-塑料
国家标准 GB/T 23296.16-2009 热固性粉末涂料用双酚A型环氧树脂
【适用范围】本标准规定了热固性粉末涂料用双酚A型环氧树脂的产品分类和分等、要求、试验方法、检验规则以及标志、包装和贮存的要求。本标准适用于双酚A型环氧树脂。产品用于热固性环氧粉末涂料和环氧聚酯粉末涂料的制造。
【中国标准分类】  G51  涂料、颜料、染料 【国际标准分类】  87.040-涂料和清漆
国家标准 GB/T 28113-2011 橡胶 苯酚和双酚A的测定
【适用范围】本标准规定了使用高效液相色谱仪对橡胶中苯酚和双酚A的测定方法。本标准适用于橡胶中苯酚和双酚A的测定。
【中国标准分类】  G40  橡胶制品及其辅助材料 【国际标准分类】  83.060-橡胶
国家标准 GB/T 30939-2014 化妆品中污染物双酚A的测定 高效液相色谱-串联质谱法
【适用范围】本标准规定了化妆品中污染物双酚A的液相色谱-串联质谱测定方法。 本标准适用于膏霜、唇膏、水剂类等化妆品中双酚A的测定。 本方法检出限:0.025 mg/kg,定量限:0.10 mg/kg。
【中国标准分类】  Y42  日用化工品 【国际标准分类】  71.100.70-美容品、化妆品
国家标准 GB 31604.10-2016 食品安全国家标准 食品接触材料及制品 2,2-二(4-羟基苯基)丙烷(双酚A)迁移量的测定
【适用范围】本标准规定了食品接触材料及制品(聚氯乙烯、聚碳酸酯、环氧树脂及其成型品)中双酚A迁移量的测定方法。
本标准适用于食品接触材料及制品(聚氯乙烯、聚碳酸酯、环氧树脂及其成型品)中双酚A迁移量的液相色谱-质谱/质谱检测。
【中国标准分类】  B50  食品综合 【国际标准分类】  67.120.30-鱼和水产品
国家标准 GB/T 32889-2016 电子电气产品中四溴双酚A的测定 气相色谱-质谱法
【适用范围】本标准规定了电子电气产品聚合物材料中四双溴酚A(Tetrabromobisphenol A,简称TBBPA)的气相色谱-质谱测定方法。本标准适用于电子电气产品聚合物材料中TBBPA的测定。
【中国标准分类】  L10  电子元件 【国际标准分类】  31.020-电子元件综合
国家标准 GB/T 34455-2017 纸、纸板和纸浆 2,2-二(4-羟基苯基)丙烷(双酚A)的测定 液相色谱法
【适用范围】本标准规定了采用液相色谱法测定纸、纸板和纸浆中2,2-二(4-羟基苯基)丙烷(双酚A)的方法。
本标准适用于各种纸、纸板和纸浆中2,2-二(4-羟基苯基)丙烷(双酚A)含量的测定。方法检出限以浓度计算为0.05mg/L,以质量计算为0.5mg/kg。
【中国标准分类】  Y57  造纸 【国际标准分类】  97.200.50-玩具
国家标准 GB/T 38420-2019 玩具聚碳酸酯和聚砜材料中双酚A迁移量的测定  高效液相色谱-串联质谱法
【适用范围】本标准规定了玩具聚碳酸酯和聚砜材料中双酚A迁移量的高效液相色谱一串联质谱的测定方法。
本标准适用于玩具聚碳酸酯和聚砜材料中双酚A迁移量的测定。其他用于玩具产品的聚合物材料经过验证后可参照本标准进行测定。
【中国标准分类】  Y57  文教、体育、娱乐用品 【国际标准分类】  97.200.50-玩具
国家标准 GB/T 41531-2022 纺织品 苯酚和双酚A的测定
【适用范围】本文件描述了采用高效液相色谱仪测定纺织品中苯酚和双酚A含量的方法。
本文件适用于各类纺织产品。
【中国标准分类】  W04  纺织综合 【国际标准分类】  59.080.01-纺织产品综合
行业标准 HG/T 2341-1992 四溴双酚A
【适用范围】
【中国标准分类】  G17  有机化工原料 【国际标准分类】  71.080.15-芳香烃
行业标准 HG/T 6086-2022 食品接触材料 高分子材料 食品模拟物中双酚A的测定 高效液相色谱法
【适用范围】本文件规定了纺织染整助剂产品中苯酚和双酚A的测定方法。 本文件适用于各类纺织染整助剂产品中苯酚和双酚A的测定。
【中国标准分类】  X08  食品综合 【国际标准分类】  67.250-与食品接触的物品与材料
行业标准 SN/T 2379-2009 玩具中苯酚和双酚A的测定
【适用范围】本标准规定了玩具中可接触液体以及聚合物材料、造型粘土、带粘合剂的贴纸类、皮革等玩具中苯酚和双酚A迁移量的液相色谱测定方法。本标准适用于玩具中可接触液体以及聚合物材料、造型粘土、带粘合剂的贴纸类、皮革等玩具中苯酚和双酚A迁移量的测定。
【中国标准分类】  Y57  文教、体育、娱乐用品 【国际标准分类】  97.200.50-玩具
行业标准 SN/T 3150-2012 出口食品中双酚A-二缩水甘油醚、双酚F-二缩水甘油醚及其衍生物残留测定 液相色谱-质谱/质谱法
【适用范围】本标准规定了出口食品中双酚A-二缩水甘油醚、双酚 F-二缩水甘油醚及其衍生物含量的液相色谱串联质谱检测方法。本标准适用于出口罐装蔬菜、罐装水果、罐装鱼、罐装肉中双酚A-二缩水甘油醚、双酚 F-二缩水甘油醚及其衍生物含量的检测。
【中国标准分类】  Y60  卫生 【国际标准分类】  97.030-家用电气设备综合
行业标准 SN/T 3334.4-2013 小型家用电器中六溴环十二烷和四溴双酚A的测定 液相色谱-串联质谱法
【适用范围】SN/T 3334的本部分规定了小型家用电器中六溴环十二烷(HBCDs)和四溴双酚A(TBBPA)的液相色谱-串联质谱测定方法。本部分适用于小型家用电器聚合物材料中六溴环十二烷和四溴双酚A的测定,测定低限分别为0.20mg/kg和0.05mg/kg。
【中国标准分类】  Y60  家用电器、日用机具 【国际标准分类】  97.030-家用电气设备综合
行业标准 SN/T 3351-2012 进出口建筑用环氧树脂粘接剂中双酚A的测定
【适用范围】本标准规定了进出口建筑用环氧树脂粘接剂中双酚A的两种测定方法,包括第一法液相色谱-质谱(LC-MS/MS)和第二法高效液相色谱法(HPLC)。其中第一法液相色谱-质谱/质谱法为仲裁法。本标准适用于进出口环氧树脂粘接剂中双酚A的测定。
【中国标准分类】  Q27  建材产品 【国际标准分类】  83.180-粘合剂和胶粘产品
行业标准 SN/T 3512-2013 电子电气产品中四溴双酚-A-双(2,3-二溴丙醚)的测定 高效液相色谱法
【适用范围】本标准规定了电子电气产品中四溴双酚-A-双(2,3-二溴丙醚)的高效液相色谱测定方法。本标准适用于电子电气产品塑料部件中四溴双酚-A-双(2,3-二溴丙醚)的测定。
【中国标准分类】  L10  电子元件 【国际标准分类】  31.020-电子元件综合
行业标准 SN/T 3822-2014 出口化妆品中双酚A的测定 液相色谱荧光检测法
【适用范围】本标准规定了化妆品中双酚A的液相色谱荧光检测方法。本标准适用于洗发膏、保湿霜、护手霜、爽肤水、精华油、爽身粉等化妆品中双酚A的测定。
【中国标准分类】  Y42  日用化工品 【国际标准分类】  71.100.70-美容品、化妆品
行业标准 SN/T 3949-2014 塑料包装 有害物质双酚A的检测方法 抗原抗体结合法
【适用范围】本标准规定了塑料包装双酚A的抗原抗体结合测定方法的试剂和材料、仪器、试验步骤和结果计算。本标准适用于塑料包装双酚A的测定。
【中国标准分类】  A82  标志、包装、运输、贮存 【国际标准分类】  55.040-包装材料和辅助物
行业标准 SN/T 4241-2015 电子电气产品中四溴双酚A的测定 气相色谱-电子捕获检测器法
【适用范围】本标准规定了电子电气产品塑料电子元器件中四双酚A(Tetrabromobisphenol A,简称TBBPA)的气相色谱-电子捕获检测器法。本标准适用于电子电气产品塑料电子元器件中TBBPA的测定。
【中国标准分类】  L04  电子元器件与信息技术综合 【国际标准分类】  31.020-电子元件综合
行业标准 SN/T 4322-2015 食品接触材料 高分子材料 双酚A残留量的测定 酶联免疫法
【适用范围】本标准规定了高分子材料中双酚A残留量的酶联免疫测定方法。本标准适用于高分子材料中双酚A残留量的测定。
【中国标准分类】  X08  食品综合 【国际标准分类】  67.250-与食品接触的物品与材料
行业标准 SN/T 4424-2016 进出口纺织品 双酚A的测定 液相色谱法
【适用范围】 本标准规定了进出口纺织品中双酚A含量的高效液相色谱测定方法。 本标准适用于进出口纺织品中双酚A含量的测定。
【中国标准分类】  W04  纺织综合 【国际标准分类】  59.080.01-纺织产品综合
行业标准 SN/T 5260-2020 涂料中四溴双酚A及磷酸三(1,3-二氯异丙基)酯的测定 液相色谱-质谱/质谱法
【适用范围】本标准规定了水性涂料和溶剂型涂料中四溴双酚A及磷酸三(1,3-二氯异丙基)酯的液相色谱-质谱测定方法。
本标准适用于水性涂料和溶剂型涂料中四溴双酚A及磷酸三(1,3-二氯异丙基)酯的测定。
本标准对水性涂料和溶剂型涂料中四溴双酚A及磷酸三(1,3-二氯异丙基)酯的测定低限分别为1mg/kg和5mg/kg。
 
【中国标准分类】  G50  涂料、颜料、染料 【国际标准分类】  87.040-涂料和清漆
行业标准 SN/T 5287-2021 进出口纺织品 双酚A的测定 表面等离子体共振法
【适用范围】本标准规定了进出口纺织品中双酚A含量的表面等离子体共振测定方法。
本标准适用于进出口纺织品中双酚A含量的测定。
【中国标准分类】  W04  纺织综合 【国际标准分类】  59.080.01-纺织产品综合
地方标准 DB13/T 2190.5-2015 塑料包装材料 水环境模拟物中双酚A迁移量的测定 高效液相色谱法
【适用范围】本标准规定了塑料包装材料 水环境模拟物中双酚A(2,2-二(4-羟基苯基)丙烷)迁移量的液相色谱测定方法。
本标准适用于塑料包装材料 水环境模拟物中双酚A迁移量的测定。
本方法在水环境模拟物中双酚A的检出限为2μg/dm2,定最限为6μg/dm2
【中国标准分类】  G40  橡胶制品及其辅助材料 【国际标准分类】  71.040.40-化学分析
地方标准 DB13/T 2590-2017 阻燃剂 四溴双酚A
【适用范围】山东省地方标准;
【中国标准分类】  G17  有机化工原料 【国际标准分类】  71.080.15-芳香烃
国际标准 ISO 18857-2-2009 双酚A(4,4-二酚基丙烷)的取样和搬运的标准实施规程
【适用范围】

This practice is issued to provide information useful in establishing sampling and handling procedures. It is expected that this information will only be utilized in conjunction with an existing health and safety program and consultation with an appropriate MSDS. The information provided herein cannot be used as a substitute for expert safety and medical advice as provided in an appropriate MSDS, but rather as a supplement to such advice.

TABLE 1 Typical Physical Properties Product Bisphenol A

154x2013;157
240
prills, flakes, crystals, powder
4.5
1.20 (solid)
Melting Point, x00B0;CBoiling Point, x00B0;C
(10.5 mm Hg)
Solid FormsFlash Point,
x00B0;F
Specific Gravity,
25x00B0;C

1.1 This practice covers procedures for safely sampling and handling 4,4`-isopropylidinediphenol, commercially known as bisphenol A (BPA), in various solid forms, and as a liquid at elevated temperatures in a manner which represents and preserves product quality.

1.2 Any person sampling or handling this product should have consulted a Material Safety Data Sheet (MSDS) for specific first aid instructions and information on the proper equipment to have available for use in the event of personal contact or exposure.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.

【中国标准分类】  Z16  有机化工原料 【国际标准分类】  13.060.50-水的化学物质检验
国外标准 ASTM D7065-2017 使用气相色谱质谱分析法测定环境水中壬基苯酚、双酚A、对特辛基苯酚、壬基苯酚一乙氧醚和壬基苯酚二乙氧醚的试验方法
【适用范围】1.1 This test method covers determination of nonylphenol (NP), nonylphenol ethoxylate (NP1EO), nonylphenol diethoxylate (NP2EO), octylphenol (OP), and bisphenol A (BPA) that are partitioned into organic solvent, separated using gas chromatography and detected with mass selective detection. These compounds or isomer mixtures are qualitatively and quantitatively determined by this test method. This test method adheres to selected ion monitoring mass spectrometry but full scan mass spectrometry has also been shown to work well under these conditions. Either analysis may be used. 1.2 The method detection limit (MDL) and reporting limit (RL) for NP, NP1EO, NP2EO, OP, and BPA are listed in Table 1. (A) MDL determined following the Code of Federal Regulations, 40 CFR Part 136, Appendix B.(B) Lowest point of the reporting range is calculated from the LV1 concentration calibration standard in Table 4. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
【中国标准分类】  G16  有机化工原料 【国际标准分类】  71.080.15-芳香烃
国外标准 ASTM D8266-2019 用高效液相色谱法分析双酚A(4,4'-亚异丙基二苯酚)的方法
【适用范围】

1.1 This test method covers the determination of trace impurities in bisphenol A (4,4′-Isopropylidenediphenol) by reverse-phase gradient high performance liquid chromatography (HPLC). It is generally meant for the analysis of bisphenol A of 99.5 % or greater.

1.2 This method is applicable to bisphenol A samples containing impurity concentration between 2 and 400 mg/kg. Users of this method believe it is linear over a wider range.

1.3 In determining the conformance of the test results using this method to applicable specification, results shall be rounded off in accordance with the rounding-off method of Practice E29.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see Section 8.

1.6 This international standard was developed in accordance with internationally recognized princip

【中国标准分类】  G17  有机化工原料 【国际标准分类】  71.080.90-酚
国外标准 ASTM D4493-2016 4、4'--二酚基丙烷(双酚A)凝固点试验方法
【适用范围】1.1 This test method describes the procedure for determination of the solidification point of bisphenol A (4,4′-isopropylidene diphenol). 1.2 The test method has been found applicable for determination of the solidification point between 150 and 157°C. 1.3 In determining conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 9.
【中国标准分类】  G17  有机化工原料 【国际标准分类】  71.080.90-酚
国外标准 ASTM D4297-2015 二酚基丙烷(双酚A)采样和处理规程
【适用范围】1.1 This practice covers procedures for safely sampling and handling 4,4′-isopropylidinediphenol, commercially known as bisphenol A (BPA), in various solid forms, and as a liquid at elevated temperatures in a manner which represents and preserves product quality. 1.2 Any person sampling or handling this product should have consulted a safety Data Sheet (SDS) for specific first aid instructions and information on the proper equipment to have available for use in the event of personal contact or exposure. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections 3, 4, 5, 6, 7 and 8 and an appropriate SDS.
【中国标准分类】  G16  有机化工原料 【国际标准分类】  71.080.90-酚
,,

常见问题

北检院检测周期一般为7-15工作日,具体周期需要根据样品情况来定。请您在咨询时尽可能的描述样品的情况以及样品状态,由此可制定更好的检测周期和检测方案。

为了防止在制样时对样品产生部分变化,导致检测数据有偏差,检测样品一般为客户提供,如果客户实在无法制作检测样品,则由北检院进行样品的制作。

检测方案可以根据客户检测需求来制定,如果客户要求相应的检测方案则按照客户提供的检测方案进行检测,如客户没有检测方案,则工程师通过检测标准进行制定,如果是非标试验,则由工程师根据样品信息对方案进行制定。

检测流程

检测流程

检测流程

检测优势

1、单位面向科研院所、学校和社会企业及科研单位,面向社会公共服务。

2、实验管理中心下设检测分析中心、科研测试中心、X射线应用中心。

3、面向物理、化学化工、材料、纳米、环境、电子、能源等众多学科。

4、拥有多台精密检测仪器设备。

5、能够从事材料微观结构分析、定性和定量分析、材料性能测定、材料质量综合评定等工作。

6、提供24小时开放服务、网络化的管理。

7、具备向校内外科学研究和品质鉴定提供公正、科研测试数据能力的重要机构。

检测实验室

检测实验室

检测实验室

第三方无源器件检测机构北检(北京)检测技术研究院拥有齐全的检测仪器和多领域检测团队,数据科学严谨,检测设备齐全。能提供全方位检测服务,7-15个工作日便可出具无源器件检测报告。
第三方石英玻璃器皿 烧瓶检测机构北检(北京)检测技术研究院拥有齐全的检测仪器和多领域检测团队,数据科学严谨,检测设备齐全。能提供全方位检测服务,7-15个工作日便可出具石英玻璃器皿 烧瓶检测报告。
第三方直接印刷木地板检测机构北检(北京)检测技术研究院拥有齐全的检测仪器和多领域检测团队,数据科学严谨,检测设备齐全。能提供全方位检测服务,7-15个工作日便可出具直接印刷木地板检测报告。
第三方银锭检测机构北检(北京)检测技术研究院拥有齐全的检测仪器和多领域检测团队,数据科学严谨,检测设备齐全。能提供全方位检测服务,7-15个工作日便可出具银锭检测报告。
北前院公众号

北前院公众号

北检研究院公众号

北检研究院公众号

北检研究院抖音

北检研究院抖音

北检研究院微视频

北检研究院微视频

北检研究院小红书

北检研究院小红书

北检研究院快手

北检研究院快手

  • 联系电话:400-6350-567投诉电话:010-82491398企业邮箱:010@yjsyi.com地址:北京市丰台区南三环西路16号2号楼27层
北检(北京)检测技术研究院版权所有 | 京ICP备2022008454号