国家标准 GB/T 7814-2017 工业用异丙醇
【适用范围】本标准规定了工业用异丙醇的技术要求、试验方法、检验规则以及标志、包装、运输和贮存。
本标准适用于丙烯水合法、丙酮加氢法、乙酸异丙脂氢化法生产的工业用异丙醇。
结构简式:(CH3)2CHOH
相对分子质量:60.10(按2016年国际相对原子质量)
【中国标准分类】 G17 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国家标准 GB/T 7814-2008 工业用异丙醇
【适用范围】本标准规定了工业用异丙醇的要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于工业用异丙醇的生产、检验和销售。
【中国标准分类】 G17 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国家标准 GB/T 7814-1987 异丙醇
【适用范围】
【中国标准分类】 G17 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国家标准 GB 16230-1996 车间空气中异丙醇卫生标准
【适用范围】本标准规定了车间空气中异丙醇最高容许浓度及其监测检验方法。 本标准适用于生产和使用异丙醇的各类企业。
【中国标准分类】 C52 卫生
【国际标准分类】 13.040.30-工作场所空气
国家标准 GB/T 27564-2011 工业用三异丙醇胺
【适用范围】本标准规定了工业用三异丙醇胺的要求、试验方法、检验规则、标志、包装、运输、贮存和安全。本标准适用于以环氧丙烷与液氨反应经精馏制得工业用三异丙醇胺(含同分异构体)。
【中国标准分类】 G17 有机化工原料
【国际标准分类】 71.080.30-有机氮化物
国家标准 GB/T 27566-2011 工业用一异丙醇胺
【适用范围】本标准规定了工业用一异丙醇胺的要求、试验方法、检验规则、标志、包装、运输、贮存和安全。 本标准适用于以环氧丙烷与液氨反应经精馏制得的工业用一异丙醇胺(含同分异构体)。
【中国标准分类】 G17 有机化工原料
【国际标准分类】 71.080.30-有机氮化物
国家标准 GB 30611-2014 食品安全国家标准 食品添加剂 异丙醇
【适用范围】本标准适用于以丙烯或丙酮为原料制得的食品添加剂异丙醇。
【中国标准分类】 X35 制盐
【国际标准分类】 67.220.20-食品添加剂
行业标准 DL/T 2280-2021 燃煤电厂烟气中三氧化硫含量的测定 异丙醇溶液吸收 离子色谱法
【适用范围】本文件规定了燃煤电厂烟气中三氧化硫含量的测定 异丙醇溶液吸收 离子色谱法测试方法。
本文件适用于燃煤电厂,工业、民用锅炉等可参照执行。
以环境空气为样本,采样体积为0.15m3时,本文件的检出限为1.0mg/m3。
【中国标准分类】 F29 电力
【国际标准分类】 27.100-电站综合
行业标准 GA/T 105-1995 血、尿中乙醇、甲醇、正丙醇、乙醛、丙酮、异丙醇、正丁醇、异戊醇的定性分析及乙醇、甲醇、正丙醇的定量分析方法
【适用范围】本标准规定了血、尿中乙醇、甲醇、正丙醇、乙醛、丙酮、异丙醇、异丁醇、正丁醇、异戊醇的检验方法。 本标准适用于低级醇类、醇性饮料中毒或中毒死亡者的血液和尿液中乙醇、甲醇、正丙醇、乙醛、丙酮、异丙醇、异丁醇、正丁醇、异戊醇的定性分析及乙醇、甲醇、正丙醇的定量分析。
【中国标准分类】 A92 社会公共安全
【国际标准分类】 13.310-犯罪行为防范
行业标准 HG/T 2892-2020 化学试剂 异丙醇
【适用范围】本标准规定了化学试剂异丙醇的性状、规格、试验、检验规则和包装及标志。
本标准适用于化学试剂异丙醇的检验。
示性式:(CH3)2CHOH
相对分子质量:60.10(根据2018年国际相对原子质量)
CAS号:67-63-0
【中国标准分类】 G63 化学试剂
【国际标准分类】 71.040.30-化学试剂
行业标准 HG/T 2892-2010 化学试剂 异丙醇
【适用范围】本标准规定了化学试剂中异丙醇的性状、规格、试验、检验规则和包装及标志。 本标准适用于化学试剂中异丙醇的检验。
【中国标准分类】 G63 化学试剂
【国际标准分类】 71.040.30-化学试剂
行业标准 HG/T 2892-1997 化学试剂 异丙醇
【适用范围】
【中国标准分类】 G63 化学试剂
【国际标准分类】 71.040.30-化学试剂
行业标准 HG 3-1167-1978 化学试剂 异丙醇
【适用范围】
【中国标准分类】 E31 化学试剂
【国际标准分类】 75.160.20-液体燃料
地方标准 CNS 1764-1994 异丙醇(99%级)
【适用范围】本标准适用于异丙醇(99%级)。
【中国标准分类】 G16 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国际标准 ISO 17183-2016 土质--通过测定乳化指数受光的衰减筛选土壤有机化合物的可萃取异丙醇
【适用范围】This International Standard specifies the procedure to screen highly contaminated soils to detectorganic compounds extractable with isopropanol
including a wide range of fuels
oils
and greases.The method is useful for finding hot spots. It is applicable both in laboratories and for site screeningin the field. The working range is approximately 0
01 to 0
3 in absorbance units
corresponding toapproximately 500 mg/kg to 10 000 mg/kg of isopropanol-extractable organic compounds in soil.The light attenuation due to light scattering/absorption approach in this method is designed to quicklyscreen soil samples using calibration with the most appropriate substance(s) likely to be present on agiven site to indicate the concentration levels.This screening technique is applicable for a broad spectrum of organic compounds
mainlyhydrocarbons. Organic compounds are a very broadly defined mixture of compounds
which show theirown specific emulsification indices (see Annex A) and a gross emulsification index in a mixture sample
defined primarily by their insolubility in water. The more insoluble the compounds (e.g. non-polarcompounds)
the higher the response. Hydrocarbons are generally less-reactive and have little polarity.Determination of emulsification indexes uses their non-polar nature to detect organic compoundsincluding a wide range of hydrocarbons from about C8 to about C36.NOTE This method can also be applied to biological substances such as vegetable oils.This method is not applicable for determination of specific organic compounds or groups of compoundsthat may be part of a larger organic compound mixture. As with other screening techniques
it isadvisable to confirm a certain percentage of both positive and negative test results
especially whennear or above a regulatory action limit or when the presence of background or when interfering organiccompounds such as surface active substances are suspected to be present.This method does not address the evaporation of any volatile organic compound mixtures (i.e.
gasoline) during sampling
preparation and detection. Although the screening method can be usedfor the quantitative detection of volatile hydrocarbons
it is not intended that the method be used forthe quantitative determination of volatile petroleum hydrocarbons unless evaporation during samplehandling is addressed; the response factor be appropriately corrected
or the method performance bedemonstrated on real samples.If emulsifiers or surface active substances (e.g. detergents) are present
significantly negatively-biasedor false negative results can be obtained. If there is any evidence for the presence of surfactances in thesoil
this method cannot be applied.
【中国标准分类】 Z04 环境保护综合
【国际标准分类】 13.080.10-土壤的化学特性
国外标准 ASTM E769-1985(2004) 测定甲醇、乙醇、丙醇和异丙醇气味的试验方法
【适用范围】
These test methods are intended to provide procedures that may be used to evaluate denatured and undenatured alcohols with 1 to 3 carbon atoms for characteristic and residual odors that will affect their end use.
The products tested are compared to reference standards using one or all of the test methods described. Interpretation of results and acceptability of the product for a specific end use are the responsibility of the panel supervisor and are based on the results obtained in testing.
These tests may be used to qualify the suitability of these products for use in a customer-producer relationship.
1.1 These test methods cover procedures for observing characteristic and residual odors and estimating odor intensity of methanol
ethanol
n-propanol
and isopropanol for the purpose of determining their odor acceptability. Several test methods are included and any or all may be used. These test methods may be used for both denatured and undenatured alcohols.
1.2 These test methods are not intended to determine subtle odor differences between alcohols
which do not affect their end use.
This standard does not purport to address all of the safety concerns
if any
associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类】 G16 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国外标准 ASTM D770-2011 异丙醇规格
【适用范围】
1.1 This specification covers isopropyl alcohol (99 % grade).
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard
an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit
in accordance with the rounding-off method of Practice E 29.
1.4 This standard does not purport to address all of the safety concerns
if any
associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.5 For hazard information and guidance
see the supplier''s Material Safety Data Sheet.
【中国标准分类】 G16 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国外标准 BS 1595-1-1986 工业用异丙醇.第1部分:异丙醇规范
【适用范围】Colour
density
distillation range
residue on evaporation
miscibility with water
water content
alkalinity or acidity
and aldehydes and ketones.
【中国标准分类】 G16 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国外标准 BS 1595-1-1986(R2011) 工业用异丙醇.第1部分:异丙醇规范
【适用范围】
【中国标准分类】 G17 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国外标准 BS 1595-1-1986(R2005) 工业用异丙醇.第2部分:试验方法
【适用范围】
【中国标准分类】 G16 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国外标准 BS 1595-2-1984 工业用异丙醇.第2部分:试验方法
【适用范围】Instructions for sampling and test reports
and methods for distillation characteristics
aldehydes and ketones content
acidity and a test for miscibility with water. Also gives cross-references to relevant general methods.
【中国标准分类】 G16 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国外标准 BS EN 13466-2-2002 异丙醇
【适用范围】
【中国标准分类】 G17 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国外标准 JIS K8839-2007 异丙醇(试剂)
【适用范围】この規格は,試薬として用いる2-プロパノール<上1)>について規定する。注 <上1)>別名:イソプロピルアルコール
【中国标准分类】 G63 化学试剂
【国际标准分类】 71.040.30-化学试剂
国外标准 JIS K1522 AMD 1-2006 异丙醇
【适用范围】この規格は,工業用のイソプロピルアルコールについて規定する。
【中国标准分类】 G17 有机化工原料
【国际标准分类】 71.080.60-醇、醚
国外标准 AS 4498-1997 食品安全国家标准 食品添加剂 聚氧乙烯聚氧丙烯胺醚
【适用范围】本标准适用于以环氧乙烷、环氧丙烷、低分子胺(如三异丙醇胺)为主要原料,氢氧化钾作为催化剂,聚合而成的食品添加剂聚氧乙烯聚氧丙烯胺醚。
【中国标准分类】 X40 食品添加剂与食用香料
【国际标准分类】 67.220-香料和调料、食品添加剂
国家标准 GB 1886.307-2020 食品安全国家标准 食品添加剂 叶绿素铜钾盐
【适用范围】本标准适用于蚕沙或草类、紫花苜蓿、荨麻、菠菜等植物为原料提取叶绿素,或者直接以叶绿素为原料,经皂化、铜代等步骤加工制得的食品添加剂叶绿素铜钾盐。使用溶剂为丙酮、二氯甲烷、甲醇、乙醇、异丙醇、正己烷和(或)石油醚(沸程为90℃~120℃)。
【中国标准分类】 X40 食品添加剂与食用香料
【国际标准分类】 67.220-香料和调料、食品添加剂
国家标准 GB 1886.316-2021 食品安全国家标准 食品添加剂 胭脂树橙
【适用范围】本标准适用于以胭脂树(Bixa orellana L.)种子的外种皮为原料,经溶剂或冷的弱碱水溶液提取、 精制得到的食品添加剂胭脂树橙(红木素)及其再经热碱性溶液水解、精制得到的食品添加剂胭脂树橙 (降红木素)。使用溶剂包括丙酮、甲醇、乙醇、止己烷、异丙醇、乙酸乙酉旨、碱性乙醇和(或)二氧化碳。
【中国标准分类】 C54;X40 食品添加剂与食用香料
【国际标准分类】 67.220.20-食品添加剂
国家标准 GB/T 4945-2002 石油产品和润滑剂酸值和碱值测定法(颜色指示剂法)
【适用范围】1.1 本标准适用于测定能在甲苯和异丙醇混合溶剂中全溶或几乎全溶的石油产品和润滑剂的酸性或 碱性组分,它适用于测定在水中离解常数大于lo-9的酸或碱,离解常数小于10-9的极弱酸或碱不影响 测定,如果盐类水解常数大于10-9,则有影响。 注 1在新的和使用过的油中,被认为具有酸性的组分包括有机酸、无机酸、酯、酚类化合物、内酯、树脂、重金属盐类和 添加剂,如抗氧剂和清净剂。同样,被认为具有碱性的组分包括有机碱、无机碱、胺类化合物、弱酸的盐类(皂类)、 多元酸的碱式盐、重金属盐类和添加剂,如抗氧剂和清净剂。 2本方法不适用于测定含有多种碱性添加剂类型的润滑油的碱值,此类油品的碱值可以用SH/T 0688的试验方 法来测定。 1.2本标准可用于表明使用中的油品在氧化条件下的相对变化。尽管滴定是在规定条件下进行的,但 是本标准不能测定绝对酸性和碱性,以预测油品在使用条件下的性能。已经知道酸值或碱值与轴承腐蚀 之间没有必然联系。 注:某些油品,例如切削油、防锈油和类似的复合油品,或深色油品,由于指示剂呈现的终点不明显,不能用本方法测 定酸值,可以用GB/T 7304的试验方法测定。颜色指示剂法测定的酸值在数值上不一定与GB/T 7304的结果相 等。颜色指示剂法测定的碱值与SH/T 0688在数值上也不一定相等,但数据具有一定相关性。
【中国标准分类】 E30 石油产品
【国际标准分类】 75.080-石油产品综合
国家标准 GB/T 7304-2014 石油产品酸值的测定 电位滴定法
【适用范围】本标准规定了用电位滴定法测定石油产品、润滑剂、生物柴油以及生物柴油调合燃料酸值的两种测定方法。 方法A 适用于能够溶解和基本溶解于甲苯和无水异丙醇混合溶剂中的石油产品和润滑剂的酸值的测定。方法A 可测定样品中那些在水中离解常数大于1×10-9的酸性组分
离解常数小于1×10-9的极弱酸不产生干扰
但水解常数大于1×10-9的盐类将会参与反应
方法A 的精密度是在酸值(以KOH计)为0.1mg/g~150mg/g的范围内建立的。 方法B适用于具有较低酸性和溶解性差异较大的生物柴油和生物柴油调合燃料的酸值的测定。 注:新油或用过油中酸性组分包括有机酸、无机酸、酯类、酚类化合物、内酯、树脂以及重金属盐类、铵盐和其他弱碱的盐类、多元酸的酸式盐和某些抗氧剂及清净添加剂。 本标准可在不考虑颜色和其他性能变化的前提下反映油品使用过程中在氧化条件下发生的相对变化。尽管滴定是在特定条件下进行的
但本标准不能用于测定油品的绝对酸性来预测其使用状态下的性能
没有发现酸值和轴承腐蚀之间有必然的联系。 注1:用本标准测得的酸值结果和用GB/T4945和SH/T0163所测得的结果可能相同也可能不同。本标准中没有尝试将测定结果和其他非滴定方式得到的测定结果进行相关联。 注2:有少数实验室观察到
当在本标准中使用水性或非水性缓冲溶液时
所得到的结果之间有一定的差异。
【中国标准分类】 E30 石油产品
【国际标准分类】 75.080-石油产品综合
国家标准 GB/T 7304-2000 石油产品和润滑剂酸值测定法(电位滴定法)
【适用范围】 本标准适用于测定能够溶解于甲苯和异丙醇混合溶剂的石油产品和润滑剂中的酸性组分。这些酸性组分在水中的离解常数要大于10<上角-9>,离解常数小于10<上角-9>的极弱酸不产生干扰,但水解常数大于10<上角-9>的盐类将会参与反应。 本标准可以显示油品在氧化条件下发生的与颜色和其他性能无关的相对变化。尽管滴定是在特定条件下进行的,但此方法不能用于测定油品的绝对酸值以预测在使用条件下的性能,酸值和轴承腐蚀之间没有必然的联系。
【中国标准分类】 E30 石油产品
【国际标准分类】 75.080-石油产品综合
国家标准 GB/T 12701-2014 工业用乙烯、丙烯中微量含氧化合物的测定 气相色谱法
【适用范围】本标准规定了用气相色谱法测定工业用乙烯、丙烯中微量含氧化合物的含量。本标准适用于甲醇、二甲醚、甲基叔丁基醚、乙醛、乙醇、异丙醇、丙酮和丁酮浓度不低于0.5mL/m3的乙烯、丙烯的测定。
【中国标准分类】 G16 有机化工原料
【国际标准分类】 71.080.10-脂族烃
国家标准 GB/T 18609-2011 原油酸值的测定. 电位滴定法
【适用范围】本标准规定了采用电位滴定法侧定原油酸值的方法。本标准适用于测定能够溶解于甲苯和异丙醇混合溶剂中的原油中的酸性组分。这些酸性组分在水中的离解常数要大于10(-9次方);离解常数小于10(-9次方)的极弱酸不产生干扰。水解常数大于10(-9次方)的盐类将会参与反应。酸值的测定范围为0.1mg/g~150mg/g。本标准适用于测定水的质量分数小于0.5%的原油。
【中国标准分类】 E21 石油、天然气
【国际标准分类】 75.040-原油