检测项目（部分）
有效氯含量
1%溶液pH值
水分
水不溶物含量
pH值
全部参数
外观
水分含量
检测样品（部分）
三氯异氰尿酸
二氯异氰尿酸钠
检测标准（部分）
国家标准 GB/T 11045.14-2005 纺织品 色牢度试验 其他实验 第14部分:毛纺织品耐二氯异氰尿酸钠酸性氯化色牢度
【适用范围】 GB/T 11045的本部分规定了一种使用二氯异氰脲酸钠测定毛纤维或毛纺织品耐酸性氯化色牢度的方法。本方法模拟了生产加工的实际状况，使用一种含有或可以释放出有效氯的液体，在弱酸性条件下进行抗缩整理，使纺织品中的羊毛具有抗缩性能。
【中国标准分类】 W04 纺织综合
【国际标准分类】 59.080.01-纺织产品综合
国家标准 GB/T 11046-1989 纺织品耐羊毛酸性氯化色牢度试验方法 二氯异氰尿酸钠
【适用范围】
【中国标准分类】 W04 纺织综合
【国际标准分类】 59.080.30-纺织物
国家标准 GB/T 37560-2019 阻燃化学品 氰尿酸三聚氰胺盐中三聚氰胺和氰尿酸的测定
【适用范围】本标准规定了阻燃用氰尿酸三聚氰胺盐中三聚氰胺和氰尿酸含量的测定方法、准确度和精密度。
本标准适用于用液相色谱外标定量法测定氰尿酸三聚氰胺盐中三聚氰胺和氰尿酸的含量。
本方法检出限：氰尿酸含量≥0.0020μg/mL，三聚氰胺含量≥0.0078μg/mL。
本标准适用于用液相色谱外标定量法测定氰尿酸三聚氰胺盐中三聚氰胺和氰尿酸的含量。
本方法检出限：氰尿酸含量≥0.0020μg/mL，三聚氰胺含量≥0.0078μg/mL。
【中国标准分类】 G70 化学助剂、表面活性剂、催化剂、水处理剂
【国际标准分类】 71.040.50-物理化学分析方法
行业标准 HG/T 3263-2001 三氯异氰尿酸
【适用范围】本标准规定了三氯异氰尿酸的要求、试验方法、检验规则、标志、包装、运输、贮存和安全等。 本标准适用于由氰尿酸、烧碱、氯气为原料制得的三氯异氰尿酸。该产品主要用作漂白剂、杀菌消毒剂、羊毛防缩剂等。
【中国标准分类】 G17 有机化工原料
【国际标准分类】 71.080.40-有机酸
行业标准 HG/T 3779-2020 水处理剂 二氯异氰尿酸钠
【适用范围】本标准规定了水处理剂二氯异氰尿酸钠产品的分类、要求、试验方法、检验规则以及标志、包装、运输、贮存。
本标准适用于水处理剂二氯异氰尿酸钠。该产品主要用于工业用水、工业废水、城市污水以及泳池水的杀菌灭藻，也可用于食品加工业的器具消毒和饮用水的应急处理等。本标准不适用于二氯异氰尿酸钠的复方制剂。
本标准适用于水处理剂二氯异氰尿酸钠。该产品主要用于工业用水、工业废水、城市污水以及泳池水的杀菌灭藻，也可用于食品加工业的器具消毒和饮用水的应急处理等。本标准不适用于二氯异氰尿酸钠的复方制剂。
【中国标准分类】 G77 化学助剂、表面活性剂、催化剂、水处理剂
【国际标准分类】 71.100.99-其他化工产品
行业标准 HG/T 3779-2005 二氯异氰尿酸钠
【适用范围】本标准规定了二氯异氰尿酸钠产品的技术要求、试验方法、检验规则以及标志、包装、运输、贮存和安全要求。\本标准适用于以氰尿酸、氢氧化钠、氯气为原料合成的二氯异氰尿酸钠。该产品主要用作生活应用水、工业用水、工业废水、城市污水的杀菌灭藻，也可用作漂白剂、羊毛防缩剂等。
【中国标准分类】 G77 化学助剂、表面活性剂、催化剂、水处理剂
【国际标准分类】 71.100.99-其他化工产品
行业标准 HG/T 4332-2012 三氯异氰尿酸泄漏的处理处置方法
【适用范围】本标准告知了三氯异氰尿酸的理化性质和危害性，规定了发生三氯异氰尿酸泄漏时的紧急措施、泄漏现场的处理方法和泄漏现场的处置方法。本标准适用于三氯异氰尿酸在生产、贮存、使用、经营和运输等过程中发生泄漏时的处理、处置。
【中国标准分类】 Z05 环境保护综合
【国际标准分类】 13.030.10-固态废物
行业标准 HG/T 4818-2015 氰尿酸
【适用范围】本标准规定了氰尿酸的要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于以尿素为原料缩合生产的氰尿酸产品。
【中国标准分类】 G77 化学助剂、表面活性剂、催化剂、水处理剂
【国际标准分类】 71.100.40-表面活性剂及其他助剂
行业标准 HG/T 5341-2018 阻燃化学品 三聚氰胺氰尿酸盐
【适用范围】本标准规定了阻燃化学品三聚氰胺氰尿酸盐的要求、试验方法、检验规则、标志、标签、包装、运输和贮存。
本标准适用于由三聚氰胺和氰尿酸为主要原料反应制得的三聚氰胺氰尿酸盐。该产品主要用作树脂、橡胶等合成材料的阻燃剂，润滑油、脂、膏的润滑添加剂等。
本标准适用于由三聚氰胺和氰尿酸为主要原料反应制得的三聚氰胺氰尿酸盐。该产品主要用作树脂、橡胶等合成材料的阻燃剂，润滑油、脂、膏的润滑添加剂等。
【中国标准分类】 G17 有机化工原料
【国际标准分类】 71.100.40-表面活性剂及其他助剂
行业标准 HDB/SH 054-2012 纺织品.色牢度试验.第X14部分:羊毛耐酸性氯化(羊毛防缩整理)色牢度:二氯异氰尿酸钠(羊毛防缩整理剂)
【适用范围】A specimen of the textile (wool textiles in all forms) is treated in a formic acid buffer solution to which solutions of sodium dichloroisocyanurate and sodium hydrogen sulfite are added succesively
and is then rinsed and dried. The change in colour of the specimen is assessed with the grey scale. This treatment simulates the manufacturing operation in which a liquid containing or liberating active chlorine under mildly acid conditions is used for imparting shrink-resistant properties to wool in textiles.
【中国标准分类】 Q25 纺织综合
【国际标准分类】 27.220-热回收、绝热
国外标准 ASTM C1289-2012e1 饰面硬质多孔聚异氰尿酸酯隔热板规格
【适用范围】1.1 This specification covers the general requirements for faced thermal insulation boards composed of rigid cellular polyisocyanurate surfaced with other materials. The insulation boards are intended for use at temperatures between −40 and 200°F (−40 and 93°C). This specification does not cover cryogenic applications. Consult the manufacturer for specific recommendations and properties in cryogenic conditions. For specific applications
the actual temperature limits shall be agreed upon by the manufacturer and the purchaser. 1.2 This standard is intended to apply to rigid cellular polyurethane-modified polyisocyanurate thermal insulation board products that are commercially acceptable as non-structural panels useful in building construction. The term polyisocyanurate encompasses the term polyurethane. For engineering and design purposes
users should follow specific product information provided by board manufacturers regarding physical properties
system design considerations and installation recommendations. Note 1—See Appendix X1 for guidance on determining wind pressure resistance of panels when required for wall sheathing applications. 1.3 The use of thermal insulation materials covered by this specification is typically regulated by building codes
or other agencies that address fire performance. Where required
the fire performance of the material shall be addressed through standard fire test methods established by the appropriate governing documents. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 2—For conversion to metric units other than those contained in this standard
refer to . 1.5 This standard does not purport to address all of the safety concerns
if any
associated with its use. It is the responsibility of the user of this standard
【中国标准分类】 Q25 建材产品
【国际标准分类】 27.220-热回收、绝热
国外标准 ASTM C1289-2011 饰面硬质多孔聚异氰尿酸酯隔热板规格
【适用范围】
1.1 This specification covers the general requirements for faced thermal insulation boards composed of rigid cellular polyisocyanurate surfaced with other materials. The insulation boards are intended for use at temperatures between x2212;40 and 200x00B0;F (x2212;40 and 93x00B0;C). This specification does not cover cryogenic applications. Consult the manufacturer for specific recommendations and properties in cryogenic conditions. For specific applications the actual temperature limits shall be agreed upon by the manufacturer and the purchaser.
1.2 This standard is intended to apply to rigid cellular polyurethane-modified polyisocyanurate thermal insulation board products that are commercially acceptable as non-structural panels useful in building construction. The term polyisocyanurate encompasses the term polyurethane. For engineering and design purposes users should follow specific product information provided by board manufacturers regarding physical properties system design considerations and installation recommendations.
1.3 The use of thermal insulation materials covered by this specification is typically regulated by building codes or other agencies that address fire performance. Where required the fire performance of the material shall be addressed through standard fire test methods established by the appropriate governing documents.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Note 18212;For conversion to metric units other than those contained in this standard refer to .
1.5 This standard does not purport to address all of the safety concerns if any associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类】 Q25 建材产品
【国际标准分类】 27.220-热回收、绝热
国外标准 ASTM C1289-2007 饰面硬质多孔聚异氰尿酸酯隔热板的标准规范
【适用范围】
1.1 This specification covers the general requirements for faced thermal insulation boards composed of rigid cellular polyisocyanurate surfaced with other materials. The insulation boards are intended for use at temperatures between 40 and 200176;F (40 and 93176;C). This specification does not cover cryogenic applications. Consult the manufacturer for specific recommendations and properties in cryogenic conditions. For specific applications the actual temperature limits shall be agreed upon by the manufacturer and the purchaser.
1.2 This standard is intended to apply to rigid cellular polyurethane-modified polyisocyanurate thermal insulation board products that are commercially acceptable as non-structural panels useful in building construction. The term polyisocyanurate encompasses the term polyurethane. For engineering and design purposes users should follow specific product information provided by board manufacturers regarding physical properties system design considerations and installation recommendations.
1.3 The use of thermal insulation materials covered by this specification is typically regulated by building codes or other agencies that address fire performance. Where required the fire performance of the material shall be addressed through standard fire test methods established by the appropriate governing documents.
1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. For conversion to metric units other than those contained in this standard refer to IEEE/ASTM SI 10.
【中国标准分类】 Q25 建材产品
【国际标准分类】 27.220-热回收、绝热
国外标准 ASTM C1289-2016 饰面硬质多孔聚异氰尿酸酯隔热板规格
【适用范围】1.1 This specification covers the general requirements for faced thermal insulation boards composed of rigid cellular polyisocyanurate surfaced with other materials. The insulation boards are intended for use at temperatures between −40 and 200°F (−40 and 93°C). This specification does not cover cryogenic applications. Consult the manufacturer for specific recommendations and properties in cryogenic conditions. For specific applications
the actual temperature limits shall be agreed upon by the manufacturer and the purchaser. 1.2 This standard is intended to apply to rigid cellular polyurethane-modified polyisocyanurate thermal insulation board products that are commercially acceptable as non-structural panels useful in building construction. The term polyisocyanurate encompasses the term polyurethane. For engineering and design purposes
users should follow specific product information provided by board manufacturers regarding physical properties
system design considerations and installation recommendations. Note 1: See Appendix X1 for guidance on determining wind pressure resistance of panels when required for wall sheathing applications. 1.3 The use of thermal insulation materials covered by this specification is typically regulated by building codes
or other agencies that address fire performance. Where required
the fire performance of the material shall be addressed through standard fire test methods established by the appropriate governing documents. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 2: For conversion to metric units other than those contained in this standard
refer to IEEE/ASTM SI 10. 1.5 This standard does not purport to address all of the safety concerns
if any
associated with it
【中国标准分类】 Q25 建材产品
【国际标准分类】 27.220-热回收、绝热
国外标准 ASTM C1289-2015 饰面硬质多孔聚异氰尿酸酯隔热板规格
【适用范围】1.1 This specification covers the general requirements for faced thermal insulation boards composed of rigid cellular polyisocyanurate surfaced with other materials. The insulation boards are intended for use at temperatures between −40 and 200°F (−40 and 93°C). This specification does not cover cryogenic applications. Consult the manufacturer for specific recommendations and properties in cryogenic conditions. For specific applications
the actual temperature limits shall be agreed upon by the manufacturer and the purchaser. 1.2 This standard is intended to apply to rigid cellular polyurethane-modified polyisocyanurate thermal insulation board products that are commercially acceptable as non-structural panels useful in building construction. The term polyisocyanurate encompasses the term polyurethane. For engineering and design purposes
users should follow specific product information provided by board manufacturers regarding physical properties
system design considerations and installation recommendations. Note 1: See Appendix X1 for guidance on determining wind pressure resistance of panels when required for wall sheathing applications. 1.3 The use of thermal insulation materials covered by this specification is typically regulated by building codes
or other agencies that address fire performance. Where required
the fire performance of the material shall be addressed through standard fire test methods established by the appropriate governing documents. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 2: For conversion to metric units other than those contained in this standard
refer to IEEE/ASTM SI 10. 1.5 This standard does not purport to address all of the safety concerns
if any
associated with it
【中国标准分类】 Q25 建材产品
【国际标准分类】 27.220-热回收、绝热
国外标准 ASTM C1289-2004 贴面硬质泡沫聚异氰尿酸酯隔热板的标准规范
【适用范围】
1.1 This specification covers the general requirements for faced thermal insulation boards composed of rigid cellular polyisocyanurate surfaced with other materials. The insulation boards are intended for use at temperatures between -40 and 200176;F (-40 and 93176;C). This specification does not cover cryogenic applications. Consult the manufacturer for specific recommendations and properties in cryogenic conditions. For specific applications the actual temperature limits shall be agreed upon by the manufacturer and the purchaser.
1.2 This standard is intended to apply to rigid cellular polyurethane-modified polyisocyanurate thermal insulation board products that are commercially acceptable as non-structural panels useful in building construction. The term polyisocyanurate encompasses the term polyurethane. For engineering and design purposes users should follow specific product information provided by board manufacturers regarding physical properties system design considerations and installation recommendations.
1.3 The use of thermal insulation materials covered by this specification may be regulated by building codes or other agencies that address fire performance or both. The fire performance of the material should be addressed through standard fire test methods established by the appropriate governing documents.
1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only and may be approximate. For conversion to metric units other than those contained in this standard refer to IEEE/ASTM SI 10.
1.5 The following safety hazards caveat pertains only to the test methods Section 11 in this specification. This standard does not purport to address all of the safety concerns if any associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类】 Q25 建材产品
【国际标准分类】 27.220-热回收、绝热
国外标准 BS EN ISO 105-X14-1997 纺织品.色牢度试验.羊毛耐酸性氯化色牢度.二氯异氰尿酸钠
【适用范围】This part of ISO 105 specifies a method for deter-mining the resistance of the colour of wool in all forms to acid chlorination using sodium dichloro-isocyanurate. This simulates the manufacturing op-eration in which a liquid containing or liberating active chlorine under mildly acid conditions is used for im-parting shrink-resistant properties to wool in textiles.note:1) 1
3-dichloro-1
3
5-triazine-2
4
6(1 H
3H
5H)-trione sodium salt.
【中国标准分类】 W55 纺织制品
【国际标准分类】 59.080.01-纺织产品综合
国外标准 BS 4841-1-2006 建筑用硬质聚异氰尿酸酯(PIR)和聚氨酯(PUR)产品--第1部分： 带自动粘合或单独粘结贴面的层压隔热板用规范
【适用范围】This British Standard specifies requirements for rigid polyisocyanurate(PIR) and polyurethane (PUR) cored laminated insulation boards withauto-adhesively and separately bonded flexible and/or rigid facings
foruse as thermal insulation for wall cavities. It also applies to productswith one flexible facing and one rigid facing.NOTE Additional information for the guidance of users
installers anddesigners is given in informative Annexes A
B
C and D to this standard.
【中国标准分类】 Q25 建材产品
【国际标准分类】 91.100.60-隔声和绝热材料
国外标准 BS 4841-1-2006(R2014) 建筑用硬质聚异氰尿酸酯(PIR)和聚氨酯(PUR)产品--第2部分： 带内部墙衬及天花板隔热用自动粘合贴面的层压板用规范
【适用范围】
【中国标准分类】 Q25 建材产品
【国际标准分类】 91.100.60-隔声和绝热材料
国外标准 BS 4841-3-2006 建筑用硬质聚异氰尿酸酯(PIR)和聚氨酯(PUR)产品--第3部分： 带沥青屋面防水膜下屋面板隔热用自动粘合或单独粘结贴面的层压板（屋面板）规范
【适用范围】This British Standard specifies requirements for rigid polyisocyanurate(PIR) and polyurethane (PUR) cored laminated boards (roofboards)with auto-adhesively or separately bonded flexible and/or rigid facings
for use as roofboard thermal insulation under built-up bituminousroofing membranes. The standard also applies to product roofboardswith one flexible and one rigid facing.NOTE 1 Because of the changes introduced into this standard
productsconforming to this standard also conform to BS EN 13165:2001incorporating amendments 1 and 2.NOTE 2 Additional information for the guidance of users
installers anddesigners is given in informative Annexes A
B
C
D and E to this standard.
【中国标准分类】 Q25 建材产品
【国际标准分类】 91.100.60-隔声和绝热材料
国外标准 BS 4841-4-2006 建筑用硬质聚异氰尿酸酯(PIR)和聚氨酯(PUR)产品--第4部分： 带非沥青单层屋面防水膜下屋面板隔热用自动粘合或单独粘结贴面的层压板（屋面板）规范
【适用范围】This British Standard specifies requirements for polyisocyanurate (PIR)and polyurethane (PUR) cored thermally insulated laminated boards(roofboards) with auto-adhesively or separately bonded flexible and/orrigid facings
for use in roofs under non-bituminous single-ply roofingmembranes. This specification is also applicable to roofboards withOSB or plywood facings bonded in place after the initial product hasbeen created .NOTE 1 Additional information for the guidance of users
installers anddesigners is given in informative Annexes A
B
C
and D to this standard.NOTE 2 Because of the changes introduced into this standard
productsconforming to this standard will also conform to BS EN 13165:2001(including amendments 1 and 2).
【中国标准分类】 Q25 建材产品
【国际标准分类】 91.100.60-隔声和绝热材料
国外标准 BS 4841-5-2006 建筑用硬质聚异氰尿酸酯(PIR)和聚氨酯(PUR)产品--第5部分： 带坡屋顶隔热板用自动粘合或单独粘结贴面的层压板（屋面板）规范
【适用范围】This British Standard specifies requirements for polyisocyanurate (PIR)and polyurethane (PUR) cored thermally insulated laminated boards(roofboards) with auto-adhesively or separately bonded flexible and/orrigid facings for use in pitched roofs over
under or between rafters.NOTE 1 Because of the changes introduced into this standard
productsconforming to this standard also conform to BS EN 13165:2001 (includingamendments 1 and 2).NOTE 2 Additional information for the guidance of users
installers anddesigners is given in informative Annexes A
B
C and D to this standard.
【中国标准分类】 Q25 建材产品
【国际标准分类】 91.100.60-隔声和绝热材料
国外标准 BS 4841-6-2006 建筑用硬质聚异氰尿酸酯(PIR)和聚氨酯(PUR)产品--第6部分： 带地板隔热用自动粘合或单独粘结贴面的层压板规范
【适用范围】This British Standard specifies requirements for polyisocyanurate (PIR)and polyurethane (PUR) cored laminated boards with auto-adhesivelyor separately bonded flexible and/or substantial rigid facings for use asthermal insulation in floors.NOTE 1 Because of the changes introduced into this standard
productsconforming to this standard also conform to BS EN 13165:2001 (includingamendments 1 and 2).NOTE 2 Additional information for the guidance of users
installers anddesigners is given in informative Annexes A
B
C and D to this standard
【中国标准分类】 Q25 建材产品
【国际标准分类】 91.100.60-隔声和绝热材料
国外标准 BS 5608-1993(R2014) 管道工程和设备隔热用预成型刚性聚氨基甲酸乙酯(PUR)和聚异氰尿酸酯(PIR)泡沫规范
【适用范围】Includes a requirement for the thermal conductivity to be designated by the manufacturer.
【中国标准分类】 Q25 建材产品
【国际标准分类】 83.100-泡沫材料
国外标准 BS 5608-1993(R2009) 人类生活用水处理用化学品.应急用化学物质.二水合二氯异氰尿酸钠
【适用范围】This European Standard is applicable to sodium dichloroisocyanurate dihydrate used for emergency treatmentof water intended for human consumption. It describes the characteristics of sodium dichloroisocyanuratedihydrate and specifies the requirements and the corresponding test methods for sodium dichloroisocyanuratedihydrate. It gives information on its use in water treatment. It also determines the rules relating to safehandling and use of sodium dichloroisocyanurate dihydrate (see Annex B).
【中国标准分类】 Q25 化学助剂、表面活性剂、催化剂、水处理剂
【国际标准分类】 91.100.60-隔声和绝热材料
国外标准 BS EN 15032-2006+A1-2008 游泳池水处理用化学试剂.三氯异氰尿酸
【适用范围】This European Standard is applicable to trichloroisocyanuric acid used directly or used to prepare commercialformulations for disinfecting swimming pool water. It describes the characteristics of trichloroisocyanuric acidand specifies the requirements and the corresponding test methods for trichloroisocyanuric acid. It givesinformation on its use for treating swimming pool water and determines the rules relating to safe handling anduse (see Annex B).
【中国标准分类】 化学助剂、表面活性剂、催化剂、水处理剂
【国际标准分类】 67.050-食品试验和分析的一般方法
检测流程
检测优势
1、单位面向科研院所、学校和社会企业及科研单位，面向社会公共服务。
2、实验管理中心下设检测分析中心、科研测试中心、X射线应用中心。
3、面向物理、化学化工、材料、纳米、环境、电子、能源等众多学科。
4、拥有多台精密检测仪器设备。
5、能够从事材料微观结构分析、定性和定量分析、材料性能测定、材料质量综合评定等工作。
6、提供24小时开放服务、网络化的管理。
7、具备向校内外科学研究和品质鉴定提供公正、科研测试数据能力的重要机构。
检测实验室
相关服务
查看全部服务第三方无源器件检测机构北检（北京）检测技术研究院拥有齐全的检测仪器和多领域检测团队，数据科学严谨，检测设备齐全。能提供全方位检测服务，7-15个工作日便可出具无源器件检测报告。
第三方石英玻璃器皿 烧瓶检测机构北检（北京）检测技术研究院拥有齐全的检测仪器和多领域检测团队，数据科学严谨，检测设备齐全。能提供全方位检测服务，7-15个工作日便可出具石英玻璃器皿 烧瓶检测报告。
第三方直接印刷木地板检测机构北检（北京）检测技术研究院拥有齐全的检测仪器和多领域检测团队，数据科学严谨，检测设备齐全。能提供全方位检测服务，7-15个工作日便可出具直接印刷木地板检测报告。
第三方银锭检测机构北检（北京）检测技术研究院拥有齐全的检测仪器和多领域检测团队，数据科学严谨，检测设备齐全。能提供全方位检测服务，7-15个工作日便可出具银锭检测报告。
